Characteristics of ceramic tile glue common sense

2022-07-22
  • Detail

As a new type of tiling material, ceramic tile adhesive adopts an organic composite ceramic tile adhesive made of high-quality cement, fine aggregate and dry powder polymer. It is green, environment-friendly, non-toxic and harmless, and it is the best choice to replace the traditional cement mortar for tiling

ceramic tile adhesive is a new type of tiling material. It adopts an organic composite ceramic tile adhesive made of high-quality cement, fine aggregate and dry powder polymer. It is green, environment-friendly, non-toxic and harmless. It is the best choice to replace the traditional cement mortar for tiling. The following editor will introduce the characteristics and common sense of ceramic tile glue

characteristics of ceramic tile glue

1. The construction speed of ceramic tile glue is fast, about 3 times faster than the traditional process, while the traditional cement mortar should be batch behind the ceramic tiles, batch by batch, the construction speed is slow, and the ceramic tiles should be soaked in water

2. Ceramic tile glue is not easy to shrink like cement mortar, so don't worry about hollowing, and ceramic tiles are firmly bonded

3. Ceramic tile glue saves materials, and the dosage per square meter is only half of that of cement mortar

4. The construction of ceramic tile glue is relatively convenient, and the site is clean and environment-friendly. Compared with cement mortar, the site is not clean and the environment is polluted

5. The quality of ceramic tile glue is relatively temperature, with a fixed formula, while the proportion of cement mortar is relatively random, and the quality is unstable

6. Ceramic tile glue is easy to transport, environmentally friendly and easy to handle

common sense of using ceramic tile adhesive

1. Deacetylated type

when curing, it will release acetic acid, which has a pungent smell, and it will corrode metal, coated glass and some inorganic materials

2. Dealcoholized TC

during high-temperature construction, the alcohol molecules generated will not be released quickly because of the speed, and bubbles will be formed, affecting the construction process

3. Deacidification type

acid glue cannot be used on cement and stone, so acetic acid will be produced after curing, causing falling off; The expansion coefficient of the material is large, there is displacement or vibration, and the bonding time is too thin, which is easy to cause the surface wrinkling phenomenon after the neutral adhesive is cured; If neutral glue and acid glue are used at the same time, it may cause neutral glue to turn yellow

editor's summary: This is the introduction about the characteristics and common sense of ceramic tile glue. I hope it will be helpful to you. If you want to know more about it, you can pay attention to the information

贵阳癫痫医院

天津试管婴儿医院

苏州牛皮癣医院

Copyright © 2011 JIN SHI